Installing A Wilson Electronics Outside Antenna - Wilson Electronics 801105 Installation Manual

Installing a Wilson Electronics Outside Antenna

Cell Tower
!
Warning: Never point the front
of the Yagi antenna toward the inside
antenna - oscillation will result, causing
amber light and gain reduction.
CORRECT
Pointing toward
cell tower
NOT
CORRECT
Contact Wilson Electronics Technical Support Team with any questions at 877-594-5766
or email: tech@wpsantennas.com. Hours: 7 am to 6 pm MST.
Select a location on the roof of the building
to install the outside antenna, using a cell
phone in test mode to find the strongest
signal from the cell tower.
RF Signal
For test mode help, visit
www.wilsonelectronics.com or call
Technical Support at 866-294-1660.
Follow the specific antenna installation
instructions included with the outside
antenna.
Lightning protection is recommended for
all in-building installations. Take extreme
care to ensure neither you nor the antenna
come in contact with any electrical power
lines.
A Yagi antenna must be installed
horizontally with the elements vertical and
the drip hole on the bottom. Ensure there
are three feet of clearance in all directions
surrounding the antenna.
!
Warning: The outside antenna must
be installed on an outdoor permanent structure
with a separation of at least 20 feet from all
persons during normal operation.
Yagi External Antenna
4