Chain Tray Kit - DoorKing 9150 Series Installation & Owner's Manual

1.9 Chain Tray Kit

Installing the Chain Tray Kit
A chain tray is recommended for gates longer than 20 ft. to support the weight of the chain. DoorKing offers a
chain tray kit in sections to fit any length gate. (DoorKing P/N 2601-270 10 Ft. section)
Chain Tray
Supporting
Bracket
(Facing up)
Weep Hole
Chain Tray
Segments
Connection
Tip: Chain tray supporting brackets can be
mounted facing up (as shown on right),
facing down or extended depending on the
chain height and position. For further
information, refer to instructions provided
with the chain tray kit.
Note: The chain should sag at least
one (1) inch per 10 feet of travel.
Base Plate Stop Brackets (P/N 2600-970) when using chain stops.
9150-065-V-12-12
Carriage Bolts
Chain Tray
Supporting
Bracket
(Facing down)
Post base plate (P/N 2600-495)
Note: All gate types can have
the chain tray installed on
them, V-rail V-wheel
ornamental is shown here.
1"
Chain Tray
Supporting
Bracket
19