GEARCASE LUBRICANT CAPACITY
Gearcase lubricant capacity is approximately 970 ml (32.8 fl. oz.).
GEARCASE LUBRICANT RECOMMENDATION
Mercury or Quicksilver High Performance Gear Lubricant.
CHECKING LUBRICANT LEVEL AND REFILLING GEARCASE
1.
Place outboard in a vertical operating position.
2.
Remove vent plug/sealing washer.
3.
Remove fill/drain plug. Place lubricant tube into the fill hole and add lubricant until it appears at
the vent hole.
a -
Vent hole
IMPORTANT: Replace sealing washers if damaged.
4.
Stop adding lubricant. Install the vent plug and sealing washer before removing the lubricant tube.
5.
Remove lubricant tube and reinstall cleaned fill/drain plug and sealing washer.
MAINTENANCE
a
b -
78
Fill hole
b
22693