Mercury 200 Verado Manual page 31

FEATURES AND CONTROLS
4. Throttle only button - Allows the boat operator to increase engine RPM for warm-up, without
shifting the engine into gear. To engage throttle only, move the control handle into the neutral
position. Press the throttle only button while moving the control handle ahead to the forward
detent. The horn indicates throttle only is engaged. Advance throttle to increase engine RPM. To
disengage, return control handle to neutral position. Engine RPM is limited to prevent engine
damage.
5. Stop/start button - Allows the boat operator to start or stop the engine without using the ignition
key. The ignition key must be in the "ON" position to start the engine.
6. Lanyard stop switch - Turns the ignition off whenever the operator (when attached to the lanyard)
moves far enough away from the operator's position to activate the switch.
7. Control handle tension adjustment screw - This screw can be adjusted to increase or decrease
the tension on the control handle (cover must be removed). This will help prevent unwanted
motion of the handle in rough water. Turn screw clockwise to increase tension and
counterclockwise to decrease tension. Adjust to tension desired.
a
25
3416
3414
22964