Mercury 200 Verado Manual page 51

FEATURES AND CONTROLS
Port Outer Engine Port Inner Engine
Off Off
Off (ignition key
Running
switch turned on)
Running Running
Off (ignition key
Running
switch turned off)
Running Running
Running Off
Off (ignition key
Running
switch turned on)
Turning off the starboard outer engine while underway will cause the starboard inner engine to go into
forced neutral/idle. Operation to the inner engine can be restored by turning the starboard outer engine
ignition key to the on position and moving the starboard control handle back into neutral position and
then re-engaging. The inner engine speed and gear shift will then be controlled by the starboard control
handle.
Turning off the port outer engine while underway will cause the port inner engine to go into forced neutral/
idle. Operation to the inner engine can be restored by turning the port outer engine ignition key to the on
position and moving the port control handle back into neutral position and then re-engaging. The inner
engine speed and gear shift will then be controlled by the port control handle.
Turning off one of the inner engines while underway will have no effect on the operation of the outer
engines.
Starboard Inner
Engine
Running Running
Running Running
Off (ignition key
Running
switch turned on)
Running Running
Off (ignition key
Running
switch turned off)
Off Running
Off (ignition key
Running
switch turned on)
45
Starboard Outer
Engine
Starboard inner
and outer engine
throttle and shift =
controlled by
starboard control
handle
Port inner engine
throttle and shift =
controlled by port
control handle
Starboard inner
engine throttle and
shift = controlled by
starboard control
handle
Port inner engine
throttle and shift =
controlled by
starboard control
handle
Starboard inner
engine throttle and
shift = controlled by
port control handle
Port outer engine
throttle and shift =
controlled by port
control handle
Starboard outer
engine throttle and
shift = controlled by
starboard control
handle
Port inner engine
throttle and shift =
controlled by port
control handle
Starboard inner
engine throttle and
shift = controlled by
starboard control
handle
Control Handle
Function