Mercury 200 Verado Manual page 60

1. Make sure the cooling water intake is submerged.
2. Check the engine oil level.
3. Open fuel tank vent on manual venting type tanks.
NOTE: The engine will not start unless the lanyard is set to the "RUN" position.
4. Set the lanyard stop switch to the "RUN" position. Refer to General Information - Lanyard Stop
Switch.
5. Shift outboard to neutral (N) position.
F
OPERATION
N
R
F
3413
28928
27780
19748
19791
N
54
R
3417