Mercury 200 Verado Manual page 75

2. Straighten the bent tabs on the propeller nut retainer.
3. Place a block of wood between gearcase and propeller to hold propeller and remove propeller
nut.
4. Pull propeller straight off shaft. If propeller is seized to the shaft and cannot be removed, have
the propeller removed by an authorized dealer.
5. To aid in future removal of the propeller, liberally coat the propeller shaft splines with one of the
following Mercury/Quicksilver products:
Tube Ref No.
Anti-Corrosion Grease
94
2-4-C Marine Lubricant with
95
Teflon
6. Flo-Torq II Drive Hub Propellers - Install forward thrust hub, replaceable drive sleeve, propeller,
thrust hub, propeller nut retainer and propeller nut onto the shaft.
a - Propeller nut
b - Propeller nut retainer
c - Thrust hub
7. Place a block of wood between gearcase and propeller and torque to specifications.
MAINTENANCE
Description
a b
c
26900
29592
Where Used
Propeller shaft splines
Propeller shaft splines
f
e
d
d - Propeller
e - Replaceable drive sleeve
f - Forward thrust hub
69
Part No.
92-802867 Q1
92-802859Q1
26941