Lubrication Points - Mercury 200 OptiMax Manual

a
b
c
d
a - Air filter
b - Filter housing
INSTALLATION
1. Place the nylon washer and rubber washer onto the air filter
and insert the filter into the housing. Rotate the filter 1/4 turn
to the lock position.
2. Position the filter housing so that the inlet hose is facing
towards the back of the engine. Reinstall the hose and secure
with a cable tie.
3. Secure the filter housing with the clamp.

Lubrication Points

1. Lubricate the following with Quicksilver or Mercury Precision
Special Lubricant 101.
Tube Ref No.
Special Lubricant 101
34
MAINTENANCE
Description
c - Clamp
d - Inlet hose
Where Used
Trim rod ball ends
70
28738
Part No.
92-802865Q0
2