Lubrication Points - Mercury 60 Operation, Maintenance & Installation Manual

3. Set the spark plug gap to specification.
Spark Plug
Spark plug gap
4. Before installing spark plugs, clean off any dirt on the spark plug seats.
Install plugs finger‑tight, and then tighten 1/4 turn or torque to
specifications.
Description
Spark plug

Lubrication Points

1. Lubricate the following with Extreme Grease or 2‑4‑C with PTFE.
Tube Ref
Description
No.
Extreme Grease
2-4-C with PTFE
95
• Propeller shaft ‑ Refer to Propeller Replacement for removal and
installation of the propeller. Coat the entire propeller shaft with
lubricant to prevent the propeller hub from corroding and seizing to the
shaft.
2. Lubricate the following with Quicksilver or Mercury Precision Lubricants
2‑4‑C with PTFE or Extreme Grease.
eng
MAINTENANCE
Where Used
Propeller shaft
Propeller shaft
65
26947
1.0 mm (0.040 in.)
Nm lb‑in.
27 –
26902
lb‑ft
20
Part No.
8M0071842
92-802859A 1