Mercury 200 OptiMax Manual page 74

6. Coat the propeller shaft with Quicksilver or Mercury Precision
Lubricants Anti‑Corrosion Grease or 2‑4‑C with Teflon.
Tube Ref No.
Anti-Corrosion
94
Grease
2-4-C Marine
95
Lubricant with Teflon
IMPORTANT: To prevent the propeller hub from corroding and
seizing to the propeller shaft (especially in salt water), always
apply a coat of the recommended lubricant to the entire propeller
shaft at the recommended maintenance intervals and also each
time the propeller is removed.
7. Flo‑Torq I Drive Hub Propellers ‑ Install forward thrust hub,
propeller, continuity washer, rear thrust hub, propeller nut
retainer, and propeller nut onto the shaft.
a - Propeller nut
b - Propeller nut retainer
c - Rear thrust hub
MAINTENANCE
Description
a b c
d
26902
Where Used
Propeller shaft
Propeller shaft
f
e
26908
d - Continuity washer
e - Propeller
f - Forward thrust washer
66
Part No.
92-802867Q
1
92-802859A1