Mitsubishi Electric AG-150A Instruction Book page 50

Date and time
Basic system
Groups
Initial setting
Interlocked LOSSNAY
Blocks
E-Mail
Functions1 Peak cut
Measurement
Set temperature range limit
Functions2 Night mode schedule
System-changeover
Outdoor temperature control
Functions3 Setback control
Interlock control
(4) Click [Save Settings] to send setting data to the AG-150A.
Table 7-1 Available Function List
Function
*1
Group name
Group structure
*1
Block name
Block structure
*1
Control method
System structure
*1: At factory shipment, the operation of the building manager is prohibited.
Current date and time setting
AG-150A network setting, external output setting
Group name setting
Connection setting of indoor units, remote controllers,
*1
system controllers and general equipment in a group
Connection setting of interlocked LOSSNAY
Block name setting
*1
Registration setting of groups in a block
Address to report an error mail, Setting of mail
communication partner
Setting of average electric range, temperature
difference between set point an inlet, and control
method of indoor units and outdoor units
*1
PLC initialize, PLC settings
Measurement controller connection setting, error mail
setting
Temperature operating range limitation setting
Night mode time interval setting
System-changeover of cooling and heating
Setting of external temperature interlock
Setting of setback control
Setting of interlock control
49
Content