4 Initial Settings
This chapter explains how to set the settings on the AG-150A's initial settings screen.
*Refer to Chapter 5 in the Instruction Book that came with the Centralized Controller AG-150A for how to set the settings after the initial
4-1 Setting the Current Date and Time
Click [Initial Settings] in the menu, and [Date and Time] screen will appear on the screen. Enter the current
date and time, and then press the [Save Settings] button to send the current date and time to AG-150A.
Note: If the user logs in as a building manager, the operations may be prohibited.
Note: If the system is connected to the TG-2000A, make all settings and changes from the TG-2000A so that the data in
TG-2000A and AG-150A will match.
Note: When the time setting is made on this screen, the setting will be applied to all the units on M-NET system.
Note: The clock setting made on the screen below will be reflected on the clocks on other units that are connected to the M-NET
line, on the Expansion Controllers (PAC-YG50ECA), and on the AG-150A controller whose "Time master setting" is set to
Note: When an Expansion Controller (PAC-YG50ECA), DIDO controller (PAC-YG66DCA), AI controller (PAC-YG63MCA), or PI
controller (PAC-YG60MCA) is added to the system, set the clock on the added controller by making the clock setting on the
clock setting screen.
Note: When an Expansion Controller (PAC-YG50ECA), DIDO controller (PAC-YG66DCA), AI Controller (PAC-YG63MCA), or PI
Controller (PAC-YG60MCA) is newly connected, make the time setting of the connected controller on this screen.
Note: When connecting multiple AG-150A controllers by connecting an Expansion Controller to the system, set the "Time master"
according to the instructions in section 4-2-3 "Time Master setting."
Date and clock settings on Expansion Controllers (PAC-YG50ECA), when connected, must be made
with the Expansion Controller properly connected to ensure proper settings.
Summer time setting
Click to set the daylight saving
Acquires the current Date and
Time from AG-150A.
Summer time setting
Enter the current date and time.
For the date, use the format [day - month - year].
Click the [Date/Time Set] button to set the current date and time.
Acquires the current Date and Time from AG-150A.
Click and tick the "Automatically adjust clock for daylight saving changes" box to
adjust the daylight saving time automatically, and select the applicable country.
Note: If the applicable country is not in the selection bar, select "Custom Settings". Click "Custom
Settings" button that will appear on the right to set the daylight saving time.
Custom Setting Screen
Enter the current date and
Click to set the current date
date and time
Set the daylight