Mitsubishi Electric AG-150A Instruction Book page 46

Note: Temperature setting cannot be made unless the operation mode has been set.
Note: If an operation mode is selected that is not available for a group of units that was selected in the output unit type field, the
units in the group will not perform any operation.
Note: To prevent malfunctions of the air conditioning units, be sure to set the preset temperature to a temperature within the
normal operating temperature range, although there may be rare cases in which it is possible to set the preset temperature
to a temperature outside the normal operating temperature range (depending on the model of the air conditioning units that
are connected to a system).
Note: Signals for Swing/AUTO and Fan speed/Auto will not be output unless these functions are available for a given air
conditioning unit model.
With respect to the air flow direction and fan speed, if the number of settable directions and air speeds vary among the
connected unit models, the signals that are rounded up to the settable range may be output.
Note: On K-control units, if the access to any item from the remote controller is prohibited, access to all items will be prohibited.
(3-2) Output unit type is "Free Contact."
Select ON or OFF on the interlocking action screen.
45