Adjustment
11.
Vibrating presser lift
04.07
11 - 9
Requirement
With the vibrating presser lift at maximum and the stitch length set at "0", presser foot 1
and vibrating presser foot 2 must lift 7.0 mm from the needle plate when the handwheel
is rotated.
4
3
1
Fig. 11 - 08
Set the vibrating presser lift at maximum and the stitch length at "0".
Allow the presser foot 1 to rest on the needle plate.
Turn the handwheel in its direction of rotation until the vibrating presser foot 2 has
reached its highest point.
Turn crank 3 (screws 4) in accordance with the requirement.
Carry out a check.
2
7 mm
7 mm