Adjustment
1 1
Adjustment
11.
Tools, gauges and other accessories
01
11.
Notes on adjusting
02
All adjustments in this manual are based on a completely assembled machine. Covers on
the machine which have to be removed and replaced for checks and adjustment work are
not mentioned in the text. The screws and nuts written in brackets are to be loosened
before making the adjustment and tightened again when the adjustment is complete.
11.
Abbreviations
03
tdc = top dead center
bdc = bottom dead center
11 - 1
Screwdrivers with blade width from 2 to 10 mm
Spanners (wrenches) with jaw width from 7 to 14 mm
Allan keys from 2 to 6 mm
Metal rule, Part No. 08-880 218-00
Adjustment gauge, Part No. 08-880 218-00
Terminal screw, Part No. 08-880 137-00
Gauge, (top feed lift 7 mm), Part No. 61-111 630-14
Needles, system 134-35
Sewing thread and test material