Mounting And Initial Operation; Mounting; Adjusting The Table Height - Pfaff 335 Instruction Manual

Mounting and initial operation

8 Mounting and initial operation
8.

Mounting

01
8

Adjusting the table height

.01.01
8 - 1
This machine may only be mounted and put into operation by qualified
specialists! All relevant safety regulations are to be adhered to!
Connections for electrical and compressed air supplies must be available at the
machine's location (see chapter 3: Specifications).
A solid, horizontal surface and adequate lighting must also be guaranteed.
Due to packaging reasons, the table top is lowered for transport.
The adjustment of the table-top height is described in the following.
1
Fig. 8 - 01
Loosen screws 1 and set the table height as desired.
Tighten screws 1 firmly.
1