Preparation
9
Preparation
9.
Needle and thread
01
The choice of the correct needle depends on the machine model and the thread and material
used.
9 - 1
All regulations and instructions in this Instruction manual are to be observed.
Special attention should be paid to the safety regulations!
Preparation work is only to be carried out by appropriately trained personnel.
The machine must always be separated from the power supply by switching off
the on/off switch or by removing the mains plug from the power supply when
carrying out preparation work!
Model
Use
B
For sewing medium materials
or comparable thicknesses or thread types
Needle thickness (Nm)
Max. thread thickness
Synthetic
40/3
in 1/100 mm
80 - 100