11.
Vibrating presser lift
04.09
Requirement
With the vibrating presser lift at maximum and the stitch length set at "0" , presser foot 1
and vibrating presser foot 2 must lift 7.0 mm from the needle plate when the handwheel
is rotated.
3
Fig. 11 - 09
Set the vibrating presser lift at maximum and the stitch length at "0" .
Allow the presser foot 1 to rest on the needle plate.
Turn the handwheel in its direction of rotation until the vibrating presser foot 2 has
reached its highest point.
Turn crank 3 (screws 4) in accordance with the requirement.
Carry out a check.
4
1
2
7 mm
Adjustment
7 mm
11 - 10