Preparation
9.
Removing the bobbin case, threading the bobbin case
04
9.
Inserting the bobbin case, adjusting the bobbin thread tension
05
9 - 3
1
Fig. 9 - 03
3
Fig. 9 - 04
Removing the bobbin case.
Lift the retainer 1 and remove the bobbin
case 2.
Threading the bobbin case.
Thread the bobbin in accordance with
Fig. 9-04.
The bobbin must rotate in the direction
of
the arrow when the thread is pulled.
2
Inserting the bobbin case.
Insert the bobbin case 2 so that it clicks
into place.
Adjusting the bobbin thread tension.
Adjust the bobbin thread tension with
screw 3.
Switch the machine off!
Switch the machine off!