Mounting And Initial Operation; Mounting; Adjusting The Table Height - Pfaff 335 Instruction Manual

- .
Mounting and initial operation
9 Mounting and initial operation
This machine may only be mounted and put into operation by qual~fied
specialists! All relevant safety regulations are to be adhered to1
Connectrons for electrical and compressed air supplies mclst be available
at
the
machine's location (see chapter 3: Specifications).
A solid, horizontal surface and adequate lighting must also be
guaranteed.
Mounting
Due to packaging reasons, the table top is lowered for transport.
1
a
1
The adjustment of the table-top height is described in the following
9.01.01
Adjusting the table height
1
O
Loosen screws 1 and set the table height as desired
Tighten screws 1 firmly.
9 - I
PFAFF