PORTABILITY KIT INSTALLATION
The manufacturer recommends that you properly install the Portability Kit when using your generator. Installing the Portability Kit is not required
for the GEN9000DF to operate, but is included with the generator purchase.
1. Locate the wheel and axle bolt and flat washer.
2. Attach the wheel by aligning the frame with the wheel, and insert the flat washer first, then the axle bolt. Tighten until wheel is secure.
3. Install the mounting feet (Figure 3) onto the front of the frame. Inserting the bolts through the frame and add the mounting feet on both the
left and right side.
GEN9000DF 9000 Surge Watt / 7500 Running Watt Portable Dual Fuel LPG Liquid Propane Gas & Gasoline Electric Start Generator Manual
35