Set The Parameters Of Google Link Function - Queclink GL100 User Manual

GL100 User manual

4.4.8. Set the parameters of google link function

Step_1
Step_4
Step_5
Step_6
Step_2
Step_1: Select "Enable This Function", after that the parameters of GTGLM can be changed and
the "Send" button is enabled.
Step_2: When "Enable This Function" is selected, the command message which shall be sent to
GL100 will be generated based on input and displayed here. Please note this command
message can also be sent to GL100 through SMS or GPRS.
Step_3: It is recommended to read the parameters from GL100 and edit based on them.
Step_4: Set mode of google link function. Please refer to "GL100 @Track Air Interface Protocol"
for detail.
Step_5: Set google link name. Please refer to the "GL100 @Track Air Interface Protocol" for
detail.
Step_6: Set the mobile index from start to end which you want to edit. Please refer to "GL100
@Track Air Interface Protocol" for detail.
Step_7: Set the direct number list of google link. Please refer to the "GL100 @Track Air Interface
Protocol" for detail.
Step_8: Click the "Send" button; download the parameters of GTGLM to GL100.
TRACGL100UM002
Step_3
Step_7
Step_8
- 24 -