CanyCom Jasper EJ20 Operator's Manual page 17

Controls and Components
Handle Lever . . . . . . . . . . . . . . Handle Lever is used to steer machine.
Accelerator Lever . . . . . . . . . . Accelerator Lever is used to control machine speed.
Main Switch . . . . . . . . . . . . . . . Turns on or off the entire machine.
Speed Adjuster . . . . . . . . . . . . Adjust machine speed.
Direction Switch . . . . . . . . . . . Selects traveling direction between forward and backward.
Battery Bag . . . . . . . . . . . . . . . The battery is in the bag and can charge the battery itself.
Battery Gauge . . . . . . . . . . . . . Indicates the level of charge and charging status of
Brake Lever . . . . . . . . . . . . . . . Selecting Brake Lever to [Drive] position engages
Deck Surface . . . . . . . . . . . . . . Load stuffs to carry with.
Slide Frame . . . . . . . . . . . . . . . Slide and adjust depending on the size of load.
Frame Lock Lever . . . . . . . . . . Use this lever when you lock or unlock slide frame.
Loading Deck Lock Knob . . . . Loading Deck Lock Knob is used to lock or unlock loading
Charger Connector . . . . . . . . . Charger Connector is used to charge battery on board.
Circuit Breaker Reset . . . . . . . Circuit Breaker Reset is used to reset circuit breaker when
Handle Lever Lock Bolt . . . . . Use this bolt to adjust the angle of handle lever.
battery.
electromagnetic clutch. In this position, electromagnetic
brake is applied until accelerator lever is operated.
Selecting it to [Free] position disengages electromagnetic
clutch.
Raising lever to unlock, pull down to lock slide frame.
deck.
it has tripped due to overload.
-9-
2