Stainless Steel; Head And Transom Doors; Windshield - Pro-Line Boats 2008 23 Sport Owner's Manual

Stainless Steel

Stainless steel is used for bow rails and deck fittings on your Pro-Line. Stainless steel is not completely
free from corrosion attack. It is NOT stain or rust proof. When used in contact with chloride salts, sulfides
or other rusting metals, stainless will discolor, rust or even corrode. The degree of surface oxidation is
directly affected by local atmosphere and saltwater concentrations. All metals are subject to corrosion in
some environments.
increased susceptibility to micro-corrosion (invisible to the unaided eye) and cracking.
Our most helpful recommendation is that you give your stainless steel hardware the same attention that
you would use to maintain other materials on your boat. Regular fresh-water washing with a mild
abrasive cleaner will keep your stainless bright and beautiful.
•
Always clean stainless frequently with soap and water. Any cleaner safe for glass is
usually safe for stainless
•
Always remove rust spots as soon as possible with a stainless, brass, silver or chrome
cleaner. Irreversible pitting will develop under rust that remains on stainless for any
period of time.
•
Always use a cleaner, like a good car wax, for added beauty and protection.
•
Never use coarse abrasives like sandpaper or steel wool on stainless as these can cause
rusting.
•
Never clean with acids or bleaches.
•
Never leave stainless in contact with iron, steel or other metals, which cause
contamination leading to rust or corrosion.
•
Always protect with a wax, especially around welds to guard against micro-corrosion,
cracking and rust spots.
Additional information from Romac and G. G. Schmitt and Sons is included in your owner's package.

Head and Transom Doors

The head door is made of a strong poly (i.e., starboard material). To clean the poly door, rinse with fresh
water to remove as much grime as possible. Then, wash with a mild dish cleaning soap and warm water
or a good marine grade cleaner that is recommended for cleaning poly, plastic or vinyl. You may use a
soft bristle nylon brush for stubborn stains. Never use any harsh chemicals, abrasive cleaners or any
hard objects, as they will damage the poly/starboard material. Be sure to read the manufacturer's
directions carefully before using any cleaning product on your boat.

Windshield

The windshield is made of Plexiglass. To clean the windshield:
•
Rinse with fresh water to remove as much grime as possible
•
Do not grind dirt, soil, saltwater residue, etc. into the windshield, as this will permanently
damage the windshield.
•
If further cleaning is required, the windshield manufacturer recommends cleaning the
windshield with a mild soap (preferably Ivory liquid soap), lukewarm water and a soft
cloth. Make sure that there is no cross contamination on the cloth. Allow the windshield
to air dry. If you feel that you must dry the windshield, use only a very very soft cloth.
The grain structure of stainless, when modified by welding processes, has
44