ECM Technika IV Instruction Manual page 32

4
Remove the shower screen and the
gasket completely.
7
Insert the shower screen into the
brew group.
10
Then, move the filter holder until the
shower screen is locked firmly into
the gasket.
The machine can be used again, as described on page 26 of the instruction manual.
The steam nozzle is blocked
Clean the holes of the steam nozzle carefully with a needle or with a paper clip.
For this purpose, the steam nozzle may be unscrewed as well.
Important
Do not lose the small gasket situated between the steam nozzle and the thread!
Afterwards replace the steam nozzle.
Instruction manual MECHANIKA · TECHNIKA
5
Keep the new spare parts ready at
hand (the rounded side of the group
gasket with ECM print faced
upwards to the brewing group).
8
Take the filter holder without filter.
11
Now you can easily lock the filter
holder into place.
31
6
Clean the group with a brush.
Lock the shower screen firmly into
the gasket.
9
Clamp the filter holder into the brew
group.
12
The group is ready for use.
ENGLISH