Mac Address Filter; Network Standby - Yamaha RX-V581 Owner's Manual

n

MAC Address Filter

Sets the MAC address filter to limit access to the unit from other network devices.
Note
Operation of the AirPlay function (p.61) or the DMC is not limited by this setting.
Filter
Enables/disables the MAC address filter.
Settings
Off Disables the MAC address filter.
Enables the MAC address filter. In "MAC Address 1–10", specify the
On MAC addresses of the network devices that will be permitted access
to the unit.
MAC Address 1–10
Specifies the MAC addresses (up to 10) of the network devices that will be
permitted access to the unit when "Filter" is set to "On".
n
Procedure
1
Use the cursor keys (q/w) to select an MAC address number
(1 to 10).
2
Use the cursor keys (e/r) to move the edit position and the
cursor keys (q/w) to select a value.
3
To exit from the menu, press SETUP.
n
DMC Control
Selects whether to allow DLNA-compatible Digital Media Controller (DMC) to control
playback.
Settings
Disable Does not allow DMCs to control playback.
Enable Allows DMCs to control playback.
Note
A Digital Media Controller (DMC) is a device that can control other network devices through the network.
When this function is enabled, you can control playback of the unit from DMCs (such as Windows Media
Player 12) on the same network.
n

Network Standby

Selects whether the unit can be turned on from other network devices (network
standby).
Settings
Off Disables the network standby function.
Enables the network standby function.
On
(The unit consumes more power than when "Off" is selected.)
Enables the network standby function.
Auto
(If "Network Connection" is set to "Wired", the unit is set to the power
saving mode when the network cable is disconnected.)
100
En