Network; Network Connection; Network Standby; Mac Address Filter - Yamaha RX-V1077 Owner's Manual

Network

Configures the network settings.
■

Network Connection

Selects the network connection method.
Settings
Select this option when you want to connect the unit to a network with
Wired
a commercially-available network cable (p.34)
Select this option when you want to connect the unit to a network via
Wireless (Wi-Fi) the wireless router (access point). For details on settings, see
"Connecting the unit to a wireless network" (p.47).
Select this option when you want to connect a mobile device to the
Wireless Direct unit directly. For details on settings, see "Connecting a mobile device
to the unit directly (Wireless Direct)" (p.52).
■
IP Address
Configures the network parameters (such as IP address).
DHCP
Select whether to use a DHCP server.
Settings
Does not use a DHCP server. Configure the network parameters
Off
manually. For details, see "Manual network settings".
Uses a DHCP server to automatically obtain the unit's network
On
parameters (such as IP address).
■
Manual network settings
1
Set "DHCP" to "Off".
2
Use the cursor keys (q/w) to select a parameter type and press ENTER.
IP Address Specifies an IP address.
Subnet Mask Specifies a subnet mask.
Default Gateway Specifies the IP address of the default gateway.
DNS Server (P) Specifies the IP address of the primary DNS server.
DNS Server (S) Specifies the IP address of the secondary DNS server.
3
Use the cursor keys (e/r) to move the edit position and the cursor keys
(q/w) to select a value.
4
To confirm the setting, press ENTER.
5
To configure another network parameter, repeat steps 2 to 4.
6
To save the changes, use the cursor keys to select "OK" and press ENTER.
7
To exit from the menu, press ON SCREEN.
■

Network Standby

Selects whether the unit can be turned on from other network devices (network
standby).
Settings
Off Disables the network standby function.
Enables the network standby function.
On
(The unit consumes more power than when "Off" is selected.)
■

MAC Address Filter

Sets the MAC address filter to limit access to the unit from other network devices.
Filter
Enables/disables the MAC address filter.
Settings
Off Disables the MAC address filter.
Enables the MAC address filter. In "MAC Address 1–10", specify the
On MAC addresses of the network devices that will be permitted access
to the unit.
• AirPlay (p.80) and DMC (p.98) operations are not subject to the MAC address filter.
CONFIGURATIONS ➤ Configuring various functions (Setup menu)
116
En