Mac Address Filter; Network Name - Yamaha Aventage RX-A870 Owner's Manual

⬛

MAC Address Filter

Sets the MAC address filter to limit access to the unit from other network devices.
Filter
Enables/disables the MAC address filter.
Settings
Off Disables the MAC address filter.
Enables the MAC address filter. In "MAC Address 1-10", specify the MAC addresses
On
of the network devices that will be permitted access to the unit.
X
AirPlay (p.90) and DMC (p.107) operations are not subject to the MAC address filter.
MAC Address 1-10
Specifies the MAC addresses (up to 10) of the network devices that will be permitted access to
the unit when "Filter" is set to "On".
⬛
Setup procedure
1
Use the cursor keys (q/w) to select "MAC Address 1-5" or "MAC Address 6-10" and press
ENTER.
2
Use the cursor keys (q/w) to select an MAC address number and press ENTER.
3
Use the cursor keys (e/r) to move the edit position and the cursor keys (q/w) to select a
value.
4
To confirm the setting, press ENTER.
5
To save the changes, use the cursor keys to select "OK" and press ENTER.
6
To exit from the menu, press ON SCREEN.
⬛

Network Name

Edits the network name (the unit's name on the network) displayed on other network devices.
⬛
Setup procedure
1
Press ENTER to enter the name edit screen.
2
Use the cursor keys and ENTER to rename and select "ENTER" to confirm the entry.
X
To clear the entry, select "CLEAR".
3
Use the cursor keys to select "OK" and press ENTER.
X
To restore the default setting, select "RESET".
4
To exit from the menu, press ON SCREEN.
⬛
MusicCast Link Power Interlock
Selects whether turning on the power of the master device of the MusicCast network (this unit)
also turns on the power of other devices of the network.
Settings
Off Disables the power interlock from the unit (MusicCast master).
On Enables the power interlock from the unit (MusicCast master).
126
En