Fireplace Insert Installation - decorflame MM650C-38ACH Instruction Manual

Step 9: Attach the drop leaf [M] on the top panel [A] and attach with 6 small screws [S]. See
Fig. I
Step 10: Install the top panel [A] to the unit with 4 screws (Q). See Fig. J
Step 11: Tighten all screws. Fig. K
BACk
Fig. I
BACk
Fig. J
BACk
Fig. K

FirEPlAcE iNSErt iNStAllAtiON:

The fireplace insert can be installed after the mantel has been fully assembled.
wARNING: MAkE SURE THE FIREPlACE INSERT CONTROlS ARE IN THE OFF
POSITION AND THE UNIT IS NOT PlUGGED IN.
Step 1: Place the insert on the floor, directly in front of the mantel (the backs of both the mantel
and insert should be facing the same direction).
Step 2: Carefully lift the insert into the mantel opening. The front of the insert should be flush with
the front of the mantel.
Step 3: Once the insert is in place, attach 3 mounting clips [R] on the top of the insert and lock
the insert in place with 3 short screws [X]. See fig.L
Step 4: Attach 2 mounting bracket [W] to the bottom with 2 screws. See fig. L.
Step 5: Move assembled unit to desired location. Unit should not be positioned in area exposed
to direct sunlight
5
Fig. L Back