A/C System; Brake System - BYD M6 Owner's Manual

Cooling system
Coolant capacity is described in the
table below.
Model
G-i, GL-I 483QB
GLX-i, GLX-iNAVI
483QB
G-i, GL-I 4G69
GLX-i, GLX-iNAVI
4G69
Coolant specification:
You are recommended to use BYD
genuine all season antifreeze/coolant.
Don't add any other fluid to it. If this
coolant is not available, you can use
major brand coolant as temporal
substitute as long as the coolant does
not contain silicates. Make sure it is a
high-quality coolant recommended for
aluminum engines.
continuous use of non-BYD genuine
coolant may cause corrosion and
even failure of the cooling system.
BYD M6 AUTO Owner's Manual
Drain the cooling system to refill
genuine BYD antifreeze/coolant as
soon as possible. Don't mix different
brands of coolant.
Coolant
Contact a BYD authorized service
Capacity
store for details.
6.4L

A/C System

7.9L
Refrigerant specification:
7.3L
HFC-134a
8.7L
Capacity: 580g

Brake System

Brake fluid specification:
DOT3
Capacity: some 1.0L
Hydraulic Steering
System
Otherwise,
Steering fluid specification:
ATF DEXRON Ⅲ
Capacity: some 1.1L
850g (with rear A/C)
Battery
Constant-Current Charging
Above 12.5V: constant-current
charging at 7A for 3 hours
12.0-12.5V: constant-current charging
at 7A for 6 hours
11.0-12.0V: constant-current charging
at 7A for 10-12 hours
Below 11.0V: 1. Constant-current
charging at 3.5A for 8-16 hours
2. Constant-current
charging at 7A for 10-12 hours
3. Constant-current
charging at 3.5A for 3 hours
Constant-voltage ChargingWith a
constant charging voltage
14.8-15.5V, the maximum current
must be no more than 17.5A; when
the charging current drops to no more
than 0.5A, charge the battery for
another 3 hours, keeping the total
charging time within 24 hours.
Maintenance Specifications 8-3
of