BYD M6 Owner's Manual page 132

Rear Seats Button
Press Rear Seats button to change
the A/C control mode between the
FRONT and REAR mode.
You can press this button to adjust the
rear A/C system on the front A/C
control panel. Rear Seats will be
displayed on the screen of the front
A/C control panel.
Press this button to return to the front
A/C control mode. FRONT SEATS will
be displayed on the screen.
If you do not make any operation in 5
seconds after switching to the rear
A/C control mode, the system will
return to the previous A/C control
mode.
When the front A/C system is turned
off, the dehumidification and cooling
functions are disabled on the rear A/C
system.
Air Conditioning (A/C) System 2-18
BYD M6 AUTO Owner's Manual
Operation Tips
To quickly cool down the vehicle
after it is exposed to intensive
sunlight, you can drive for a few
minutes with the windows open.
The A/C system can cool down the
vehicle faster when the hot air is
discharged.
Make sure the air intake grid in the
front of the windshield is not
blocked by such matters as leaves
or snow.
When the weather is damp, do not
let the cool air blow to the
windshield; otherwise fogging may
appear von the windshield due to
the temperature
between the inside and outside.
Keep the air flowing freely under
the front seats so that the air
circulation inside the vehicle is
sufficient.
When the weather is cold, to
prevent fogging on the windows,
you can run the fan on high speed
for one minute in order to remove
the snow or moisture in the air
intake channel.
When the air outside the vehicle is
dusty, all windows must be closed.
If the air entering the vehicle is still
dusty, set the A/C air intake mode
to interior circulation and set the
fan speed to any value other than
0.
difference