Electronic Clock - BYD M6 Owner's Manual

Balance or Fader to your desired level.
The current setting is displayed in
numbers.
Treble/Bass
These two mode can adjust the
timbre.
Press AUDIO button to select TRE or
BAS mode.
Turn the volume knob to adjust the
timbre to your desired level. The
current setting is displayed
numbers.
If there is no operation on the volume
knob for 3 seconds, the system will
return to the selected sound mode.
Sound System 2-6
BYD M6 AUTO Owner's Manual

Electronic Clock

When the ignition switch is at ACC or
ON, the clock is displayed on the
sound system screen. To set up the
clock, long press AUDIO (Clock)
button for 2 seconds, when you hear
a prompt tone, the system enters the
clock setup mode. Press the H end
(presetting 4) of the strip button until
the hour value reaches the current
time; press the M end (presetting 5)
until the minute value reaches the
in
current time.
Under clock setup mode, press R end
(presetting 6) to quickly set up the
clock to the beginning of the next or
previous hour. If the minute value is
within 30, the hour value will be set to
the previous hour. If the minute value
is above 30, the hour value will be set
to the next hour.
For example:
1:06 will be set to 1:00.
1:52 will be set to 2:00.
If the clock on a new vehicle is not set
up, or after the battery
disconnected or depleted, the time
display will flicker to remind you to set
up the clock.
is