BYD M6 Owner's Manual page 173

Lift up and remove the lower cover
plate
Take out tools
1. Fastening connector
2. To take out the jack, rotate the
connector in the compression
direction until the jack is released.
3. To store the jack, rotate the
connector in the
direction until the jack is firmly
fastened. This prevents the jack
from falling off during a collision or
hard braking.
BYD M6 AUTO Owner's Manual
Take out the spare tire
Loosen and remove the nut. Take out
the spare tire.
To store the spare tire, put it in place
with the inner side of the wheel facing
up. Then secure the tire by steps in
extension the reverse sequence of removal.
This prevents the spare tire from
flying forward during a collision or
hard braking.
2. Block the wheel
When jacking up the vehicle, block
the wheel diagonally opposite to the
flat tire to keep the vehicle from
rolling.
The chock block must be placed in
front of a front wheel and behind a
rear wheel.
Emergency Handling 5-9