Taking The Robot Out Of The Water; Turning The Robot Off; Pulling The Robot Out Of The Water - Maytronics Liberty Premium 8 User Instructions

Note: When using combined brushes or Wonder brushes remove the plastic coverings on the
brushes before use. Gently squeeze the Wonder brush material in the water until it is totally wet.

7. TAKING THE ROBOT OUT OF THE WATER

7.1. Turning the robot off

The robot will automatically shut down either at
the end of the cleaning cycle or when the battery
capacity drops below the lowest allowable level.
If you would like to turn off the robot before the
end of the cleaning cycle, press continuously for
2 seconds on the on/off switch button. The LED
indicators will flash quickly several times and the
robot will switch off.
Liberty Premium 8
Liberty_Premium_English.indd 9 Liberty_Premium_English.indd 9
ON
User Instructions
|
3. Press the on/off switch button on the float for
one second until both LED indicators are lit.
Now you can release the float.
The robot will start its working cycle.
The green LED indicator flashes throughout the
cleaning cycle.
OFF
7.2. Pulling the robot out of the
water
Upon completion of an operating cycle, the
robot automatically switches off and moves to
one of the pool walls to make pulling it out of the
pool easier.
Bring the robot to the surface by gently pulling
the float and cable.
9
4/2/12 6:19 PM 4/2/12 6:19 PM