Dismantling And Cleaning The Impeller - Maytronics Liberty Premium 8 User Instructions

4. Reassembling the filter elements
Insert the locating tabs at the bottom of the filter element into their grooves on the base frame
then close the "S" clip.
Reinstall the base frames with filters according
to the diagram.
Do not force the filters into place.
CAUTION
1
12
Liberty_Premium_English.indd 12 Liberty_Premium_English.indd 12
Locating tab
Locating tab groove
2
Grooved
end
fitting
8.2. Dismantling and cleaning the
impeller
Ensure to switch the robot off before
opening the impeller, by pressing on
CAUTION
the on/off switch on the float.
The LEDs will blink for several seconds
before shutting down.
If you notice debris trapped in the impeller,
open the impeller and remove the debris, then
reassemble.
Liberty Premium 8
"S" clip
Octagonal
end
fitting
User Instructions
|
4/2/12 6:19 PM 4/2/12 6:19 PM