Setting Up The Enclosure - Dell 5000 Series Installation And Operation Manual

Feature
6. cable tie-off (17)
7. cable conduit openings (8)
8. primary ground (internal)
9. primary ground (external)
10. door-stop cables (2)
11. door termal ribs

Setting up the Enclosure

1 Install the Enclosure's wall mount bracket at a desired location and secure it to
the wall using the wall mount screws.
NOTE: Ensure the notch on the bracket is on the top.
to prevent accidental cable disconnection,
tie all cables to the cable tie-off guides.
route the cables through the conduits (1
inch and .75 inch diameter)
connect the grounding cable to the
system
connect the grounding cable to the
system
restricts the door from opening
dissipates the heat generated by the
system
Enclosure Overview 54