Loading Data Communications Software; Removing An Old Modem Driver - Multitech MultiModem MT5600ZDX User Manual

Removing an Old Modem Driver

When your new modem replaces another modem, the old modem driver remains
in Windows, and the old modem driver is still selected in HyperTerminal and other
Windows applications. Though you can change the application connection
descriptions one at a time, it is easier to force the Windows applications to use the
new modem by removing the old modem driver from Windows.
1. Click the Start button, point to Settings, and click Control Panel.
2. Double-click the Modems icon to open the Modems Properties dialog box.
3. In the list box, select the old modem.
4. Click Remove, and then click Close.
5. The next time you dial a HyperTerminal connection, it will select your new

Loading Data Communications Software

MultiTech includes a data communications software package on the product CD
shipped with your modem. In general, however, the modem will work with most
data communications software packages. Data communications software gives the
user access to lower-level commands that govern (at a detailed technical level) how
the modem operates, that is, how the modem handles incoming and outgoing data
streams, etc.
Load the software as you would any Windows application program. During instal-
lation under Windows NT/2000/Xp, an advisory screen may appear saying "FAX
capture driver installation" and causing a delay in the installation. Be aware that
this is normal and the installation process has not failed or stalled. Simply wait a
few moments until this screen disappears.
modem and ask you to confirm the selection.
2 Installation
11