Introduction; What You Will Need; Safety Warnings - Multitech MultiModem MT5600ZDX User Manual

Introduction

This chapter shows you step-by-step how to set up your Multi-Tech modem, test it,
and make your first calls.

What You Will Need

Before starting, make sure you have everything you will need.
We supply
An MT5600ZDX data/fax modem or a MT5600ZDXV voice/data/fax modem
A DC power transformer
One RJ11 phone cable
A printed Quick Start Guide
An system CD containing modem drivers, this User Guide, a communications
software package (PhoneTools) and other software programs
Four vinyl gripper feet for the bottom of the modem
You supply
A computer with an available serial port. The processor speed should be at least
75 MHz in order to take full advantage of the ZDXV's telephony features.
A shielded RS232 serial cable with a male DB-25 connector on one end and a
connector to match your computer's serial port on the other end.
A nearby AC power outlet
A nearby phone jack
(Optional) If you want speakerphone functions along with the ability to record
sound or .WAV files through the sound card at the same time, you will need:
• One stereo PC microphone
• One stereo male to male patch cord
• One sound card
• Speakers

Safety Warnings

• Use this product only with UL- and CUL-listed computers.
• Never install phone wiring during a lightning storm.
• Never install a phone jack in a wet location unless the jack is specifically designed
for wet locations.
• Never touch uninsulated phone wires or terminals unless the phone line has been
disconnected at the network interface.
• Use caution when installing or modifying phone lines.
• Avoid using a phone (other than a cordless type) during an electrical storm; there
is a risk of electrical shock from lightning.
• Do not use a phone in the vicinity of a gas leak.
• To reduce the risk of fire, use only 26 AWG or larger telephone line cord.
2 Installation
6