Hangar 9 Cessna 182 Skylane Assembly Manual page 17

Section 6: Installing the Flap Linkage
Step 4
Feed the servo lead out through the wing root (no lead
extension needed). Connect the flap linkage to the servo arm
and adjust the linkage so there is no binding when the flaps are
in the up position.
Step 5
Secure the flap servo hatch in place with the #2 wood screws
and check the flaps for freedom of movement. You will adjust
the flap travel in the control throw section.
Step 6
Repeat the previous steps for the opposite flap linkage.
Continued
17