Auto White Balance Standard Data Input; (Mvc-Fd90) - Sony MVC-FD85 Service Manual

11. Auto White Balance Standard Data Input

Adjust the white balance standard data at 3200 K.
Mode STILL
Subject Clear chart
(Color bar standard picture frame)
Adjustment Page F
Adjustment Address 3A to 3D, 59
Note 1: If the data of page: 6, address: 02 is "01", select page: 6, address:
01, set data: 00, and press the PAUSE button.
Note 2: After the power is turned on, this adjustment can be done only
once.
Adjusting method:
1) Select page: 0, address: 01, and set data: 01.
2) Select page: 6, address: 01, set data: 11, and press the PAUSE
button of the adjustment remote commander.
3) Select page: 6, address: 01, set data: 0B, and press the PAUSE
button.
(The auto white balance standard data input is performed and
the adjustment data is stored in page: F, address: 3A to 3D, 59)
4) Select page: 6, address: 02, and check that the data is "01".
Processing after Completing Adjustments:
1) Select page: 6, address: 01, and set data: 00, and press the
PAUSE button.
2) Select page: 0, address: 01, and set data: 00.
12. White Balance ND Filter Compensation

(MVC-FD90)

Compensate the white balance deviation when ND filter is ON.
Mode
Subject
Adjustment Page
Adjustment Address
Note 1: This adjustment should be carried out upon completion of "Auto
White Balance Standard Data Input".
Note 2: If the data of page: 6, address: 02 is "01", select page: 6, address:
01, set data: 00, and press the PAUSE button.
Note 3: After the power is turned on, this adjustment can be done only
once.
Adjusting method:
1) Select page: 0, address: 01, and set data: 01.
2) Select page: F, address: 27, after noting down the data, set data:
80, and press the PAUSE button of the adjustment remote
commander.
3) Select page: 6, address: 1C, set data: 03, and wait for 1 second.
4) Select page: 6, address: 01, set data: 11, and press the PAUSE
button of the adjustment remote commander.
5) Select page: 6, address: 01, set data: 09, and press the PAUSE
button.
(The white balance ND filter compensation is performed and
the adjustment data is stored in page: F, address: 4F, 50.)
6) Select page: 6, address: 02, and check that the data is "01".
Processing after Completing Adjustments:
1) Select page: 6, address: 1C, set data: 00.
2) Select page: 6, address: 01, and set data: 00, and press the
PAUSE button.
3) Select page: F, address: 27, set the data noted down at step 2)
of "Adjusting method", and press the PAUSE button.
4) Select page: 0, address: 01, and set data: 00.
5-20
STILL
Clear chart
(Color bar standard picture frame)
F
4F, 50