Light Level Adjustment; Auto White Balance Standard Data Input - Sony DSC-F55 Service Manual
Hide thumbs
Also See for DSC-F55:
- Operating instructions manual (108 pages) ,
- User manual (48 pages) ,
- Specifications (2 pages)
Table of Contents
Advertisement
8. Light Level Adjustment
Adjust the standard LV value.
Mode
Subject
Adjustment Page
Adjustment Address
Note 1: Check that the data of page: 6, address: 02 is "00". If not, turn the
power of the unit OFF/ON.
Note 2: If "Initializing the B, E, F Page Data" was performed before this
adjustment, check that the data (Fixed data-2) of page: E, address:
4A was modified correctly.
Adjusting method:
1)
Select page: 0, address: 01, and set data: 01.
2)
Select page: 5, address: F1, and set data: FF.
3)
Select page: 6, address: 10, and set data: 58.
4)
Select page: 6, address: 01, set data: 0D, and press the PAUSE
button of the adjustment remote commander.
(The light level adjustment is performed and the adjustment
data is stored in page: F, address: 26, 28.)
5)
Select page: 6, address: 02, and check that the data is "01".
Processing after Completing Adjustments:
1)
Select page: 6, address: 10, and set data: 00.
2)
Select page: 6, address: 01, set data: 00, and press the PAUSE
button.
3)
Select page: 5, address: F1, and set data: 00.
4)
Select page: 0, address: 01, and set data: 00.
Downloaded from:
https://www.usersmanualguide.com/
STILL
Clear chart
(Color bar standard picture frame)
F
26, 28
9. Auto White Balance Standard Data Input
Adjust the white balance standard data at 3200K.
Mode
Subject
Adjustment Page
Adjustment Address
Note: Check that the data of page: 6, address: 02 is "00". If not, turn the
power of the unit OFF/ON.
Adjusting method:
1)
Select page: 0, address: 01, and set data: 01.
2)
Select page: E, address: 52, after noting down the data, set
data: 0E, and press the PAUSE button of the adjustment remote
commander.
3)
Select page: 6, address: 10, and set data: 58.
4)
Select page: 6, address: 01, set data: 11, and press the PAUSE
button.
5)
Select page: 6, address: 01, set data: 0B, and press the PAUSE
button.
(The auto white balance standard data input is performed and
the adjustment data is stored in page: F, address: 3A to 3D.)
6)
Select page: 6, address: 02, and check that the data is "01".
Processing after Completing Adjustments:
1)
Select page: E, address: 52, set the data noted down at step 2),
and press the PAUSE button.
2)
Select page: 6, address: 10, and set data: 00.
3)
Select page: 6, address: 01, and set data: 00, and press the
PAUSE button.
4)
Select page: 5, address: F1, and set data: 00.
5)
Select page: 0, address: 01, and set data: 00.
5-23
STILL
Clear chart
(Color bar standard picture frame)
F
3A to 3D
Advertisement
Table of Contents
