Auto White Balance Standard Data Input; White Balance Nd Filter Compensation (Fd88) - Sony MVC-FD83 Service Manual

9. Auto White Balance Standard Data Input

Adjust the white balance standard data at 3200K.
Mode
Subject
Adjustment Page
Adjustment Address
Note 1: Check that the data of page: 6, address: 02 is "00".
If not, turn the power of unit OFF/ON.
Adjusting method:
1) Select page: 0, address: 01, and set data: 01.
2) Select page: E, address: 52, after noting down the data, set
data: 1B, and press the PAUSE button of the adjusting remote
commander.
3) Select page: 6, address: 10, and set data: 58.
4) Select page: B, address: 41, set data: 30, and press the PAUSE
button of the adjusting remote commander.
5) Select page: 6, address: 01, set data: 11, and press the PAUSE
button of the adjusting remote commander.
6) Select page: 6, address: 01, set data: 0B, and press the PAUSE
button of the adjusting remote commander.
(The auto white balance standard data input is performed and
the standard data is stored in page: F, addresses: 3A to 3D)
7) Select page: 6, address: 02, and check that the data is "01".
Processing after Completing Adjustments:
1) Select page: 6, address: 01, set data: 00, and press the PAUSE
button of the adjusting remote commander.
2) Select page: 6, address: 10, and set data: 00.
3) Select page: B, address: 41, set data: 00, and press the PAUSE
button of the adjusting remote commander.
4) Select page: E, address: 52, set data noted down at step 2) and
press the PAUSE button of the adjusting remote commander.
5) Select page: 0, address: 01, and set data: 00.
6) Perform "Auto White Balance Adjustment". (FD83)
Perform "Auto White Balance ND Filter Compensation".
(FD88)
STILL
Clear chart
(Color reproduction adjustment
frame)
F
3A to 3D

10. White Balance ND Filter Compensation (FD88)

Adjust to compensate the white balance at ND filter ON.
Mode
Subject
Adjustment Page
Adjustment Address
Note 1: Check that the data of page: 6, address: 02 is "00".
If not, turn the power of unit OFF/ON.
Adjusting method:
1) Select page: 0, address: 01, and set data: 01.
2) Select page: E, address: 52, after noting down the data, set
data: 1B, and press the PAUSE button of the adjusting remote
commander.
3) Select page: 6, address: 10, and set data: 58.
4) Select page: B, address: 41, set data: 30, and press the PAUSE
button of the adjusting remote commander.
5) Select page: 6, address: 1C, and set data: 03.
6) Wait for 1 second.
7) Select page: 6, address: 01, set data: 11, and press the PAUSE
button of the adjusting remote commander.
8) Select page: 6, address: 01, set data: 09, and press the PAUSE
button of the adjusting remote commander.
(The white balance ND filter compensation is performed and
the compensation data is stored in page: F, addresses: 4F and
50)
9) Select page: 6, address: 02, and check that the data is "01".
Processing after Completing Adjustments:
1) Select page: 6, address: 01, set data: 00, and press the PAUSE
button of the adjusting remote commander.
2) Select page: 6, address: 1C, and set data: 00.
3) Select page: 6, address: 10, and set data: 00.
4) Select page: B, address: 41, set data: 00, and press the PAUSE
button of the adjusting remote commander.
5) Select page: E, address: 52, set data noted down at step 2) and
press the PAUSE button of the adjusting remote commander.
6) Select page: 0, address: 01, and set data: 00.
7) Perform "Auto White Balance Adjustment".
5-18
STILL
Clear chart
(Color reproduction adjustment
frame)
F
4F, 50