Modification Of B, E, F, 7 Page Data - Sony MVC-FD85 Service Manual

Address Initial value
FD85 FD90
A1 Fixed data-2 (Modified data. Copy
the data built in the same model.)
A2 Fixed data-1 (Initialized data)
A3
A4
A5 Fixed data-2 (Modified data. Copy
the data built in the same model.)
A6 Fixed data-1 (Initialized data)
A7
A8
A9 Fixed data-2 (Modified data. Copy
the data built in the same model.)
AA to CF Fixed data-1 (Initialized data)
D0 20 AA/B2 Bright adj. (LCD)
(*3) *3: LCD TYPE SH/ LCD TYPE CA
D1 60 66/60 Color adj. (LCD)
(*3) *3: LCD TYPE SH/ LCD TYPE CA
D2 A0/80 A8/A0 White balance adj. (LCD)
(*2) (*3) *2: LCD TYPE SA/ LCD TYPE ST
D3 90/80 7A/6A *3: LCD TYPE SH/ LCD TYPE CA
(*2) (*3)
D4 D0 B8/C0 Contrast adj. (LCD)
(*3) *3: LCD TYPE SH/ LCD TYPE CA
D5 90 B0/54 Black limit adj.(LCD)(FD85),
(*3) D range adj.(LCD)(FD90)
*3: LCD TYPE SH/ LCD TYPE CA
D6 80 7C/8A VG center adj.(LCD)(FD85)
(*3) V-COM level adj.(LCD)(FD90)
*3: LCD TYPE SH/ LCD TYPE CA
D7 70/80 6F VCO adj. (LCD)(NTSC)
(*2) *2: LCD TYPE SA/ LCD TYPE ST
D8 A0/80 74/8A V-COM adj.(LCD)
(*2) (*3) *2: LCD TYPE SA/ LCD TYPE ST
*3: LCD TYPE SH/ LCD TYPE CA
D9 72 73/5F Fixed data (DC BL LEVEL (LCD))
(*3) *3: LCD TYPE SH/ LCD TYPE CA
DA Fixed data-1 (Initialized data)
DB
DC 9A B5/9A Fixed data (AC BL LEVEL (LCD))
(*3) *3: LCD TYPE SH/ LCD TYPE CA
DD 90/60 6F/4F VCO adj. (LCD)(PAL)
(*2) (*3) *2: LCD TYPE SA/ LCD TYPE ST
*3: LCD TYPE SH/ LCD TYPE CA
DE Fixed data-2 (Modified data. Copy
the data built in the same model.)
DF to FF Fixed data-1 (Initialized data)
Table. 5-1-2.
Remark
5-9
1-2-2. Initializing the B, E, F, 7 Page Data
1. Initializing the B, E, F, 7 Page Data
Note 1: If "Initializing the B, E, F, 7 Page Data" is performed, all data of
the B page, E page, F page and 7 page will be initialized. (It is
impossible to initialize a single page.)
Note 2: If the B, E, F, 7 Page data has been initialized, "Modification of B,
E, F, 7 Page Data" and following adjustments need to be performed
again.
1) Video system adjustments
2) Camera system adjustments
Adjusting page F
Adjusting Address 10 to FF
Adjusting page 7
Adjusting Address 00 to FF
Adjusting page E
Adjusting Address 00 to FF
Adjusting page B
Adjusting Address 00 to FF
Initializing Method:
1) Select page: 0, address: 01, and set data: 01.
2) Select page: 6, address: 03, and set the following data.
05: MVC-FD85
04: MVC-FD90
3) Select page: 6, address: 00, and set data: 2D.
4) Select page: 6, address: 01, set data: 2D, and press the PAUSE
button.
5) Select page: 6, address: 02, and check that the data changes to
"01".
6) Perform "Modification of B, E, F, 7 Page Data".

2. Modification of B, E, F, 7 Page Data

If the B, E, F, 7 Page data has been initialized, change the data of
the "Fixed data-2" address shown in the following tables by manual
input.
Modifying Method:
1) Before changing the data, select page: 0, address: 01, and set
data: 01.
2) New data for changing are not shown in the tables because
they are different in destination. When changing the data, copy
the data built in the same model.
Note: If copy the data built in the different model, the camera may
not operate.
3) When changing the data, press the PAUSE button of the
adjustment remote commander each time when setting new
data to write the data in the non-volatile memory.
4) Check that the data of adjustment addresses is the initial value.
If not, change the data to the initial value.
Processing after Completing Modification of B, E, F, 7 Page data
1) Select page: 2, address: 00, and set data: 29.
2) Select page: 2, address: 01, and set data: 29, and press the
PAUSE button of the adjustment remote commander.