Table of Contents
Advertisement
Manually Installing a Network Adapter Driver
Windows NT 4.0
50
This section contains the procedure for manually installing a network
adapter driver in a Windows NT 4.0 operating system.
Note
You should review the
performing the following procedure.
1.
Shutdown Windows NT and power OFF the computer.
2.
Install the network adapter card. Refer to
Adapter Card
on page 17 and the documentation that came with
your computer for instructions.
3.
Power ON the computer.
4.
From the desktop, click Start.
5.
Select Settings, then select Control Panel, as shown in Figure 28.
Installation Guidelines
Installing a Network
Figure 28 Start Menu
on page 32 before
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
