D-Link xstack DGS-3612G Instruction Manual page 37

show snmp community
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the currently entered SNMP community strings:
config snmp engineID
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To give the SNMP agent on the Switch the name "0035636666"
DGS-3612G:4#config snmp engineID 0035636666
Command: config snmp engineID 0035636666
Success.
DGS-3612G:4#
xStack DGS-3612G Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Used to display SNMP community strings configured on the Switch.
show snmp community <community_string 32>
The show snmp community command is used to display SNMP
community strings that are configured on the Switch.
<community_string 32> − An alphanumeric string of up to 32
characters that is used to identify members of an SNMP community.
This string is used like a password to give remote SNMP managers
access to MIB objects in the Switch's SNMP agent.
None.
DGS-3612G:4#show snmp community
Command: show snmp community
SNMP Community Table
Community Name
-------------------------------- ------------------------------- ------------
dlink
private
public
Total Entries: 3
DGS-3612G:4#
Used to configure a name for the SNMP engine on the Switch.
config snmp engineID <snmp_engineID>
The config snmp engineID command configures a name for the
SNMP engine on the Switch.
<snmp_engineID> − An alphanumeric string that will be used to
identify the SNMP engine on the Switch.
Only administrator-level users can issue this command.
View Name
ReadView
CommunityView
CommunityView
34
Access Right
read_write
read_write
read_only