D-Link xstack DGS-3612G Instruction Manual page 114

DGS-3612G:4#config gvrp 1-4 state enable ingress_checking enable
acceptable_frame tagged_only pvid 2
Command: config gvrp 1-4 state enable ingress_checking enable
acceptable_frame tagged_only pvid 2
Success.
DGS-3612G:4#
enable gvrp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable the generic VLAN Registration Protocol (GVRP):
DGS-3612G:4#enable gvrp
Command: enable gvrp
Success.
DGS-3612G:4#
disable gvrp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable the GARP VLAN Registration Protocol (GVRP):
DGS-3612G:4#disable gvrp
Command: disable gvrp
Success.
DGS-3612G:4#
xStack DGS-3612G Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Used to enable GVRP on the Switch.
enable gvrp
This command, along with disable gvrp below, is used to enable
and disable GVRP globally on the Switch, without changing the
GVRP configuration on the Switch.
None.
Only administrator-level users can issue this command.
Used to disable GVRP on the Switch.
disable gvrp
This command, along with enable gvrp above, is used to enable and
disable GVRP on the Switch, without changing the GVRP
configuration on the Switch.
None.
Only administrator-level users can issue this command.
111