D-Link xstack DGS-3612G Instruction Manual page 17

enable clipaging
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable pausing of the screen display when a command output reaches the end of the page:
disable clipaging
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable pausing of the screen display when a command output reaches the end of the page:
xStack DGS-3612G Layer 3 Gigabit Ethernet Managed Switch CLI Manual
DGS-3612G:4#config serial_port baud_rate 115200
Command: config serial_port baud_rate 115200
Success.
DGS-3612G:4#
Used to pause the scrolling of the console screen when a command
displays more than one page.
enable clipaging
This command is used when issuing a command that causes the
console screen to rapidly scroll through several pages. This
command will cause the console to pause at the end of each page.
The default setting is enabled.
None.
Only administrator-level users can issue this command.
DGS-3612G:4#enable clipaging
Command: enable clipaging
Success.
DGS-3612G:4#
Used to disable the pausing of the console screen scrolling at the
end of each page when a command displays more than one screen
of information.
disable clipaging
This command is used to disable the pausing of the console screen
at the end of each page when a command would display more than
one screen of information.
None.
Only administrator-level users can issue this command.
DGS-3612G:4#disable clipaging
Command: disable clipaging
Success.
DGS-3612G:4#
14