D-Link xstack DGS-3612G Instruction Manual page 295

Layer 3 gigabit ethernet managed switch
Hide thumbs Also See for xstack DGS-3612G:
Table of Contents

Advertisement

show authen server_group
Parameters
Restrictions
Example usage:
To view authentication server groups currently set on the Switch.
config authen parameter response_timeout
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the response timeout for 60 seconds:
xStack DGS-3612G Layer 3 Gigabit Ethernet Managed Switch CLI Manual
configured on the Switch.
This command will display the following fields:
Group Name: The name of the server group currently configured on
the Switch, including built in groups and user defined groups.
IP Address: The IP address of the server host.
Protocol: The authentication protocol used by the server host.
<string 15> - Enter an alphanumeric string of up to 15 characters to
define the previously created server group to be viewed.
Entering this command without the <string> parameter will display all
authentication server groups on the Switch.
None.
DGS-3612G:4#show authen server_group
Command: show authen server_group
Group Name
IP Address
---------------
---------------
Darren
10.53.13.2
tacacs
10.53.13.94
tacacs+
---------------------------------------------------------
xtacacs
---------------------------------------------------------
Total Entries : 4
DGS-3612G:4#
Used to configure the amount of time the Switch will wait for a user
to enter authentication before timing out.
config authen parameter response_timeout <int 0-255>
This command will set the time the Switch will wait for a response of
authentication from the user.
response_timeout <int 0-255> - Set the time, in seconds, the Switch
will wait for a response of authentication from the user attempting to
log in from the command line interface or telnet interface. 0 disables
the timeout for the response. The default value is 30 seconds.
Only administrator-level users can issue this command.
DGS-3612G:4# config authen parameter response_timeout 60
Command: config authen parameter response_timeout 60
Success.
DGS-3612G:4#
Protocol
--------
TACACS
TACACS
292

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents