D-Link xstack DGS-3612G Instruction Manual page 249

show pim neighbor
Restrictions
Example usage:
To display PIM settings as configured on the Switch:
show pim
Purpose
Syntax
Description
Parameters
Restrictions
Usage example:
To display PIM settings as configured on the Switch:
DGS-3612G:4#show pim
Command: show pim
PIM Global State : Disabled
PIM-DM Interface Table
Interface
------------
System
Total Entries : 1
DGS-3612G:4#
xStack DGS-3612G Layer 3 Gigabit Ethernet Managed Switch CLI Manual
If no parameters are specified, all PIM neighbor router tables are
displayed.
None.
DGS-3612G:4#show pim neighbor
Command: show pim neighbor
PIM Neighbor Address Table
Interface Name Neighbor Address Expire Time
--------------- ----------------
System 10.48.74.122
Total Entries : 1
DGS-3612G:4#
Used to display current PIM configuration.
show pim {ipif <ipif_name 12>}
This command will list current PIM configuration settings for a specified
IP interface or all IP interfaces.
ipif <ipif_name 12> – The name of an IP interface for which PIM
settings are listed.
If no parameters are specified, all PIM settings are displayed for all
interfaces.
None.
IP Address
---------------
10.90.90.90/8 35
-----------
5
Hello Join/Prune
Interval Interval State
-------- ---------- --------
60 Enabled
246