D-Link xstack DGS-3612G Instruction Manual page 32

create snmp user
Restrictions
Example usage:
To create an SNMP user on the Switch:
DGS-3612G:4#create snmp user dlink default encrypted by_password auth md5
canadian priv none
Command: create snmp user dlink default encrypted by_password auth md5
canadian priv none
Success.
DGS-3612G:4#
xStack DGS-3612G Layer 3 Gigabit Ethernet Managed Switch CLI Manual
auth - The user may also choose the type of authentication algorithms used to
authenticate the snmp user. The choices are:
md5 − Specifies that the HMAC-MD5-96 authentication level will be used.
md5 may be utilized by entering one of the following:
•
<auth password 8-16> - An alphanumeric sting of between 8 and 16
characters that will be used to authorize the agent to receive
packets for the host.
•
<auth_key 32-32> - Enter an alphanumeric sting of exactly 32
characters, in hex form, to define the key that will be used to
authorize the agent to receive packets for the host.
sha − Specifies that the HMAC-SHA-96 authentication level will be used.
•
<auth password 8-20> - An alphanumeric sting of between 8 and 20
characters that will be used to authorize the agent to receive
packets for the host.
•
<auth_key 40-40> - Enter an alphanumeric sting of exactly 40
characters, in hex form, to define the key that will be used to
authorize the agent to receive packets for the host.
priv – Adding the priv (privacy) parameter will allow for encryption in addition
to the authentication algorithm for higher security. The user may choose:
•
none – Adding this parameter will add no encryption.
•
des – Adding this parameter will allow for a 56-bit encryption to be
added using the DES-56 standard using:
•
•
Only administrator-level users can issue this command.
<priv_password 8-16> - An alphanumeric string of between 8
and 16 characters that will be used to encrypt the contents of
messages the host sends to the agent.
<priv_key 32-32> - Enter an alphanumeric key string of
exactly 32 characters, in hex form, that will be used to encrypt
the contents of messages the host sends to the agent.
29